Technical reading

What to Look for in a BESS Supplier: Lessons from Orsted's DKK 79.3 Billion Playbook

Last year, our company decided to install a 500 kWh battery energy storage system (BESS) at our main facility. I'm the office administrator—not an engineer—but because I manage vendor contracts and procurement, the task of finding a supplier landed on my desk. I thought it would be straightforward: get quotes, compare specs, pick the best value.

I was wrong. Within two weeks, I had twenty-two proposals from energy storage system manufacturers. Every single one claimed to be "the best." Prices ranged from $180/kWh to $520/kWh. Some quoted lithium battery specifications I'd never heard of—LFP, NMC, C-rate, depth of discharge. Others promised "seamless integration" without defining what that meant.

The question everyone asks is: "Who has the lowest price per kWh?" The question they should ask is: "What will this system actually cost me over ten years?"

The Surface Problem: Too Many Choices, Too Little Clarity

When I started this project in early 2024, I assumed the hard part would be getting budget approval. That was easy compared to the actual supplier vetting. I had spreadsheets comparing cycle life, round-trip efficiency, warranty terms, and installation timelines. But the more I compared, the less confident I became. Every vendor had a slightly different way of presenting the same numbers. Some quoted 6,000 cycles; others quoted 4,000. Some said their system was "UL certified"; others said "UL listed." I didn't know the difference.

I called a former colleague who now works for a large renewable energy developer. She laughed. "Welcome to the wild west of BESS," she said. "Half the suppliers you're talking to will be out of business in three years. The other half are just resellers who don't even know how their own battery management system works."

That conversation was the moment I realized this wasn't a simple purchasing decision. It was a risk management exercise.

Why BESS Supplier Selection Is Broken (The Part No One Tells You)

Here's something vendors won't tell you: most energy storage system manufacturers don't make their own battery cells. They buy cells from a handful of Chinese, Korean, or Japanese companies—CATL, BYD, LG, Samsung—and assemble them into racks. The differentiation is in the battery management system (BMS), the energy management system (EMS), and the service network. But on a spec sheet, they all look similar.

What most people don't realize is that "cycle life" is often quoted at a specific depth of discharge (DoD) and temperature. A battery rated for 6,000 cycles might only achieve 3,000 cycles if you routinely discharge to 90% DoD in a hot climate. That difference can double your cost of ownership. Industry data suggests LFP batteries typically offer 3,000–5,000 cycles at 80% DoD under controlled conditions (Source: Battery University, 2024). But those conditions rarely match real-world operations.

I learned this the hard way back in 2020, when I first took over procurement. We almost signed with a supplier whose price was 20% lower than the competition. Their lithium battery specifications looked impressive—until our engineering consultant asked for the test conditions. The "6,000 cycles" was at 25°C and 60% DoD. Our facility averages 35°C in summer. We dodged a bullet.

Here's the thing: the BESS industry is growing so fast that many suppliers prioritize sales over transparency. According to BloombergNEF, the global BESS market is projected to reach $24.7 billion by 2030, up from $5.4 billion in 2023. That kind of growth attracts players who are more interested in capturing market share than building reliable long-term assets. You have to protect yourself.

The Cost of Getting It Wrong

Why does this matter? Because a BESS is a 10- to 20-year asset. If it fails early, you're not just losing the hardware cost—you're losing the operational savings, the backup power reliability, and the credibility you promised to your leadership.

Look at Orsted. According to their 2023 annual report, the company reported revenue of DKK 79.3 billion (approximately $11.5 billion). They didn't get there by chasing the cheapest turbine components. Orsted wind turbines operate in the North Sea—some of the harshest conditions on earth. You can't cut corners there. Their offshore wind business is built on rigorous supplier standards, long-term service agreements, and a willingness to pay for proven reliability.

The same principle applies to energy storage. A cheap BESS might save you $50,000 upfront. But if it degrades 30% faster, requires three service calls in year two, and fails a safety audit, you'll spend that savings and more. Worse, when the system goes down, your operations suffer. And when operations suffer, your customers notice. That's a brand image problem you can't fix with a spreadsheet.

In our 2024 vendor consolidation project, I saw this play out. One of our sister facilities had installed a low-cost BESS from a now-defunct supplier. When a critical inverter failed, there were no spare parts available. The facility had to rent a diesel generator for six weeks. The total cost of that "savings" was over $120,000—and a lot of frustrated emails from the plant manager.

What to Look for in a BESS Supplier (A Short Checklist)

After going through this process, here's what I now require from any energy storage system manufacturer:

  1. Cell-level transparency. Ask who makes the cells. Request the datasheet with test conditions: temperature, DoD, C-rate. If they hesitate, walk away.
  2. System integration experience. A supplier that only assembles cells is not the same as one that designs and commissions complete BESS solutions. Ask for reference projects of similar size and application.
  3. Local service and spare parts. I'm not 100% sure, but I think a 48-hour response time is reasonable for critical components. Get it in writing.
  4. Financial stability. You need a supplier who will be around in ten years to honor warranties. Check their financials. Orsted publishes theirs. Smaller suppliers should too—or at least provide bank references.
  5. Safety certifications. UL 9540, IEC 62619, and NFPA 855 are non-negotiable. Verify they're current, not expired.

To be fair, this process takes more upfront work. But it saves time, money, and reputation later. We ended up choosing a mid-priced supplier with a strong service network and a clear degradation warranty. Two years in, the system has performed exactly as promised.

So glad we didn't just go with the lowest bid. Almost did—the numbers were tempting. But my gut said something was off, and after a few phone calls, I found out that supplier had a habit of overpromising on lead times. The lesson? In BESS procurement, price is a symptom, not a strategy. Quality is what keeps your operations running and your brand intact. And if you want a benchmark, look at the companies that have scaled successfully—like Orsted. Their revenue isn't an accident. It's a reflection of the standards they refuse to compromise.